The Decorative Safety Glass Ceiling System consists of rolled-form steel or extruded aluminum main tees and cross-tees, with a minimum exposed flange of 15/16”, connected together to form a 24”x24” module for installation of the SD-Series of Decorative Safety Glass Panels. Custom designed modules and decorative panels available to suit individual design and special requirements.
Standard lightweight 23-3/4”x23-3/4”x1/4” to ½” thick glass panels are set on metal grid system positioned a minimum of 9” below the actual ceiling. Fluorescent lamps are then positioned over each main-T of the grid system creating maximum and even light diffusion to the set area below.
Where possible, area above to be primed white to afford maximum light reflection.
Flexibility and Advantages :
** Much sought after mechanical space is available above the system,
hidden yet easily accessible for maintenance and service.
** Because of the suspension quality of its design, the system is
appropriate for use in commercial settings where large volumes of space require
development.
** Creative of a new image is simply a matter of redesign, either with
the existing or new panels. The end result in a face-lift which is minimal in
cost, yet maximizes the exposure of a building positive image.
| Return To Home | SD-Series Home |
 |